Method 1

1) Click on the sizing tool above.

2) Print the sizing tool.

3) Carefully cut out the sizer.

4) Wrap it snugly around the part of the toe (or digit) where you want the ring to lay in the direction of the arrow. For most toes, the best location is in the middle, just past the toe tip.

5) Write down the size (if you’re in between sizes, go to the higher size) where the end of the sizer meets the number. This is the number you will enter when ordering your ring..

6) If you feel that the tip of your toe is much larger than the center where the ring will lay, measure the tip and give us that second measurement in the comments area.

Method 2

Note:
70% wear size 3’s & 4’s
20% wear size 2’s & 5’s

1) Follow steps 4, 5 and 6 using one of the following in place of the sizing tool.
     A) String
     B) Dental Floss
     C) Fishing Line
     D) Grocery Store Twist Tie

2) Mark the string where the ends meet.

3) Lay it flat on the millimeter side of a ruler and use the chart below to determine your size.

Note:
70% wear size 3’s & 4’s
20% wear size 2’s & 5’s